Classic Hybrid Shutter

Classic Hybrid Shutter

  • $12.99


Quick Overview

  • Need something while you wait? Check out our affordable Redi Shades Temporary Paper Shades!
  • Measuring for shutters is very important. Please ensure you are selecting the correct measurements above. Don't hesitate to give one of our shutter experts a call at 888-257-1840 and we can help guide you though the process. Check out our Measure & Install tab for more information.
  • When considering an inside mount frame, you should also measure on the diagonal (from corner to corner) each way. If the measurements are off more than 1/2", you should consider ordering an outside mount frame.
  • If your windows tilt in, you should consider an outside mount frame. An inside mount frame will prevent you from opening your windows.
  • Trim molding can affect the installation of your shutters. Ideally, not having trim molding works best. If your windows have trim molding, please click here to see another shutter option that would work best with your windows.
  • If you window has a sill then you need to choose the 4 Sided w/ Sill Frame option to ensure your shutters can be installed properly.
  • A replacement louver is included with each shutter. This should be stored is a safe place, wrapped up and laid flat (so there will not be any warping) so you'll be able to fix your louver immediately in case of an accident and it'll match perfectly since they are produced at the same time as your shutter.
  • 36" maximum width for single panel.
  • Pre-drilled installation holes are strategically placed on all frames for accurate, quick and clean installation. Some assembly is required.
  • If your louvers are loose and don't want to stay in place, each shutter panel has a tension screw on each side. Simply use a screwdriver to turn each tension screw a 1/4 of a turn. Do this on both sides of the panel.
  • Please note this product is not covered under our FIT Guarantee.

  • Need something while you wait? Check out our affordable Redi Shades Temporary Paper Shades!
  • Measuring for shutters is very important. Please ensure you are selecting the correct measurements above. Don't hesitate to give one of our shutter experts a call at 888-257-1840 and we can help guide you though the process. Check out our Measure & Install tab for more information.
  • When considering an inside mount frame, you should also measure on the diagonal (from corner to corner) each way. If the measurements are off more than 1/2", you should consider ordering an outside mount frame.
  • If your windows tilt in, you should consider an outside mount frame. An inside mount frame will prevent you from opening your windows.
  • Trim molding can affect the installation of your shutters. Ideally, not having trim molding works best. If your windows have trim molding, please click here to see another shutter option that would work best with your windows.
  • If you window has a sill then you need to choose the 4 Sided w/ Sill Frame option to ensure your shutters can be installed properly.
  • A replacement louver is included with each shutter. This should be stored is a safe place, wrapped up and laid flat (so there will not be any warping) so you'll be able to fix your louver immediately in case of an accident and it'll match perfectly since they are produced at the same time as your shutter.
  • 36" maximum width for single panel.
  • Pre-drilled installation holes are strategically placed on all frames for accurate, quick and clean installation. Some assembly is required.
  • If your louvers are loose and don't want to stay in place, each shutter panel has a tension screw on each side. Simply use a screwdriver to turn each tension screw a 1/4 of a turn. Do this on both sides of the panel.
  • Please note this product is not covered under our FIT Guarantee.

Add A Review

Bad

       

Good